We – EPG Group the largest gearbox & motors , couplings and gears manufacturing unit in China with 5 diverse branches. For much more information: Cell/whatsapp/telegram/Kakao us at: 0086~thirteen 571 88828 13858117778 571 88828
Product Qualities
1. Weight: 50g
two. Rated Voltage: 12DCV
three. Procedure Frequency: 100pps
4. Phase angle: 7.5/eighty five.25
five. Typical Appliances: Refrigerator, Clever Sanitary, Computerized Door Lock
| Model | Voltage | Resistance | Frequency | Pull-in Torque | Detent Torque | No-load Pull-in | No-load Pull-out | Action Angle |
| (V) | (Ω) | (PPS) | (mN. M) | (mN. M) | Frequency | Frequency | (1-2phase) | |
| (PPS) | (PPS) | |||||||
| twelve | a hundred and ten | 100 | ≥147 | ≥78.4 | ≥350 | ≥600 | seven.5°/85 | |
| 35BYJ46 | twelve | one hundred thirty | a hundred | ≥147 | ≥78.4 | ≥350 | ≥600 | 7.5°/85 |
| 35BYJ46 | twelve | 200 | a hundred | ≥78.four | ≥39.two | ≥350 | ≥600 | 7.5°/85 |
| 35BYJ46 | 12 | a hundred and fifty | 100 | ≥78.4 | ≥39.2 | ≥350 | ≥600 | seven.5°/43.75 |
ABOUT US
Ritscher group was set up in 2006.we often focus on micro-motors for family electrical equipment and business appliance because location up.presently we have two professional micro-motor factories in China which severally found in HangZhou town and HangZhou town.it has an spot of 25,000 sq. meters plants and far more than three hundred employees, once-a-year output is 3 million pcs and has 5 million pcs yearly producing capability.after numerous a long time advancement,we had created a great track record in the industry and obtained much more and far more customers’ trust in the world.
We started from shaded pole motors at beginning, up to now,our product included of shaded pole motors,synchronous motors,stepping motors ,capacitor motors, BLDC motors, DC motors and compressors. Our product are broadly employed for producing refrigerators, freezers, micro-wave ovens, air warmers, air exhausters, ventilators,ovens, air filter, massage machines and a lot of other equipments.
As a realiable good quality warranty,Ritscher has comprehensive R&D departement,QC department,producing division,buy division etc. has best making tools like Aluminum diecasting, Zinc diecasting, Sheet steel stamping, Plastic injection molding and many others. also check/ detection unit like multiplex temp measuring gadget, efficiency parameter inspection device, Phenol peptide resolution pinhole tester,Anechoic room and many others.
Endeavoring to supply the best solution and service to consumers,we usually do the most hard work to grow to be an outstanding company of micro motors.
Ritscher is often ready to establish honest business romantic relationship with pals from all in excess of the world.
Welcome get in touch with with us!
Consider ritscher ,take pleasure in present day life!
Our business FAQ for you
(1) Q: What kind motors you can supply?
A:For now,we primarily supply Kitchen area Hood Motor,DC Motor,Gear Motor,Enthusiast Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor etc.
(2) Q: Is it possible to visit your manufacturing unit
A: Certain. But remember to kindly keep us posted a few times in advance. We want to verify our
plan to see if we are offered then.
(3) Q: Can I get some samples
A: It relies upon. If only a couple of samples for individual use or replacement, I am scared it will
be tough for us to give, because all of our motors are personalized created and no inventory
obtainable if there is no further wants. If just sample tests before the formal order and
our MOQ, price and other terms are acceptable, we might really like to supply samples.
(4) Q: Is there a MOQ for your motors?
A: Sure. The MOQ is between 1000~ten,000pcs for distinct versions right after sample acceptance.
But it is also okay for us to take scaled-down lots like a number of dozens, hundreds or 1000’s
For the first 3 orders after sample approval.For samples, there is no MOQ prerequisite. But the less the better (like no a lot more than 5pcs) on situation that the quantity is adequate in case any adjustments required soon after initial screening.
The use of unique tools manufacturer’s (OEM) element figures or trademarks , e.g. CASE® and John Deere® are for reference needs only and for indicating product use and compatibility. Our organization and the listed substitute components contained herein are not sponsored, accepted, or produced by the OEM.
