Single and double reduction planetary equipment drives to be utilized with electric, hydraulic, Plastic Gear Rack atmosphere motors or mechanical power input from high speed, low torque sources to deliver reduced speeds at increased torques. The input side has regular SAE pads for electric motor mounting. Obtainable in the three output configurations proven below. Many units could be furnished with an intrinsic parking brake.
Single reduction drives are limited to 3500 RPM input; dual reduction drives to 5000 RPM. Units with integral parking input speed is bound to 2500 RPM.The same torque is available in either direction of rotation. Torque ratings are intermittent. For constant operation reduce torque ratings to about 1/3 to 1/2 the values shown. Units provide 95% power transmission efficiency.

Wheel Drive
Input side has standard SAE pads and splined input. Output side has hub for installation automobile wheel. Free wheel can be done by using the spring disconnect to disengage the drive shaft. The disengage feature can be regular on all wheel drives.

Shaft Output
Input side regular SAE pads with splined insight. Output side options include: Keyed round, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is regular SAE pads with splined insight. Output side includes a flanged spindle for coupling to the load.

Swing Drives
Ever-Power model 6 is offered with or without integral parking brakes. The “SW” Power Wheel has extra-huge tapered roller bearings, a ductile iron hub and heat treated ring gear to reduce backlash growth caused by wear. The external bearing nut supplies the supreme in shaft retention and shaft power. Output could be a spindle shaft or various sizes of integral pinion gears.