Gear Packing containers For Rotary Cutter’s, Shredders, and Choppers

Item description
RC 30 Collection Gearbox, 40hp Rated, one-3/eight” SB enter, 1-1/2″ X 12 Spline Output. one:1.47 Ratio Replace your broken rotary cutter gearbox with this substitute device. Why rebuild when you can replace at this sort of a lower cost? These gearboxes have been used by Worksaver, HawkLine, Intercontinental, WAC, Huge Bee, LMC, King Kutter, Midwest, Servis, Bush Hog, some Howse and a lot of far more. Notice: Genuine Gearbox could have a rounded housing or square as demonstrated, depending on present availability, all inner elements are interchangeable and technical specs for equally bins are identical! This gearbox attributes a 1:one.forty seven Velocity Up gear ratio for use on 5′ and greater diameter rotary cutters. Market common 1-three/eight” clean diameter input shaft with one/2″ shear bolt hole and retaining ring groove and one.57″ diameter twelve tapered spline output shaft permit fitment to most gentle, standard and medium obligation rotary cutters. Every single gearbox functions high velocity ball bearing units and warmth handled gears and shafts to ensure long lifestyle. 4 bolt mounting matches sector requirements. Each gearbox consists of blade provider mounting nut and cotter pin. Gearboxes are delivered dry and require 16 ounces of eighty-90W gearlube or equivalent. Disclaimer: Any and all Authentic Tools Manufacturer’s (OEM) tradenames, trademarks, drawings, hues, descriptive information and part numbers are used for elements identification reasons only, and DN Products, LLC (DN) is in no way implying that any particular elements are OEM elements. Further, any use of the OEM’s tradenames, trademarks, drawings or part quantities by DN is developed only to assist DN’s consumers, in obtaining the suitable DN portion or element which will exchange the OEM’s part.

rotary cutter gearbox