The Taper Install Direct Thread Adaptor provides a direct thread interface for taper mounted suppressors. Two pieces of wrench flats make it equally easy to attach or remove from the suppressor or your firearm’s muzzle threads. No proprietary tools needed. Available in 1/2×28 and 5/8×24 with 18x1mm support coming soon. While it is effortless to have direct thread suppressor capacity that may move from host to host without the need for further muzzle products, it is necessary to remember that every host firearm should be checked for baffle alignment via visual inspection before firing.

The 1/2×28 Insert can be utilised with cartriges up to 30 caliber and the 5/8×24 can be utilized up to .338 caliber.

The use of immediate thread adaptors improves on immediate thread mounted suppressors, by allowing the end user to have modular thread pitches. One Taper Attach Suppressor to Rule Them All.
Black Nitrided
1.5 Ounce Weight
Wrench Flats for every contingency
Taper Attach Repeatability and Stability
Multi-Thread versatility for your Taper Install Suppressor
taper adapters allow the utilization of holders or tools with a different machine-side taper then the machine spindle taper, such as using a BT40 tapping chuck on a 50-taper spindle.

These adapters get rid of lead time losses in case of a machine breakdown. Adapters can also help in testing custom tools on another machine than the planned production machine.

Taper adapters avoid the necessity for a supply of new holders or equipment for a particular machine. They arrive prepared to use with built-in locked Taper Adapter china clamping mechanisms featuring a clamping screw on a ball bearing for steep taper clamping or HSK locking device for taper clamping.
The steep taper may be the standardised form of a tool taper for clamping tools in the main spindle of a machine tool
The steep taper is standardised in DIN 69871 part 1
No self-locking (in contrast with the Morse taper), thereby making tool adjustments easier without clamping. That is specifically significant for automated tool changes
Small clamping travel equals short clamping time
High torsional rigidity as a result of short distance between your cutting edge and spindle bearing (short overall length)
For adapting morse taper equipment to milling machines that take R8 tools
Alloy steel hardened to 50-52 rc
Critical surfaces precision ground
Use in R8 Machines
Turning Equipment More taper minimizing sleeve is employed to convert your headstock from #2 MT to #1 MT. This is useful if you have a drive middle or pen mandrel which is certainly 1MT as well as your headstock is 2MT