The EP Greenhouse geared motor is a compact and lightweight reduction gear reducer with a built-in limit switch system that is ideal for assembly of a locally available electric engine. The gear driver can be used in manually-controlled or climate-managed ventilation and screen systems in greenhouses. The quick and easy-to-install EP gear reducer is definitely rainproof and windproof. The gear motor includes a high protection course (IP65) and can be used within an ambient temperature of 0-60 °C.

The low-noise gear driver for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel transmitting ensures that the drive shaft is definitely locked when the decrease geared motor is not running. The fully sealed reduction gear driver has an growth chamber with a diaphragm to keep the gear essential oil at a low pressure under all situations, even at high temperature ranges. Thanks to the use of an expansion chamber, the gear driver can be installed in any position. There are no restrictions, because there is no need for a bleed plug. The sealed reduction reducer keeps the gear oil of the gear motor in ideal condition because of its entire operating life time. The gearbox is suitable for discontinuous use, operating class s3-30%, with a maximum activation period of 25 minutes.

The Gear box reduction reducer has an FT85 motor assembly flange, on to which a suitable IEC standard motor can easily be installed (EN 50347).

The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit change system is installed within an integrated chamber and is usually enclosed by an impact-resistant plastic-type material cover. The limit change system is accessible and easy to adjust. The limit switch system’s optimum switching range is usually 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The gear reducer has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The geared motor for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.

Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of application of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temperatures of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, optimum activation time 25 a few minutes.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC regular motor (EN 50347).
Maximum switching range of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).