Single and double reduction planetary gear drives to be utilized with electric, hydraulic, surroundings motors or mechanical power insight from high swiftness, low torque sources to provide decreased speeds at increased torques. The input part has regular SAE pads for motor mounting. Available in the three output configurations proven below. Many units could be furnished with an intrinsic parking brake.
One reduction drives are limited to 3500 RPM input; double reduction drives to 5000 RPM. Units with integral parking input speed is bound to 2500 RPM.The same torque comes in either direction of rotation. Torque ratings are intermittent. For constant operation reduce torque rankings to about 1/3 to 1/2 the values shown. Units provide 95% power transmission efficiency.

Wheel Drive
Input side has standard SAE pads and splined insight. Output side has hub for mounting automobile wheel. Free wheel is possible by using the spring disconnect to disengage the drive shaft. The disengage feature is usually standard on all wheel drives.

Shaft Output
Input side standard SAE pads with splined input. Output side choices include: Keyed round, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is standard SAE pads with splined insight. Output side has a flanged spindle for coupling to the strain.

Swing Drives
Ever-Power model 6 is offered with or without essential parking brakes. The “SW” Power Wheel has extra-huge tapered roller bearings, a ductile iron hub and high temperature treated ring gear to hydraulic planetary drive minimize backlash growth due to wear. The exterior bearing nut supplies the greatest in shaft retention and shaft power. Output can be a spindle shaft or numerous sizes of essential pinion gears.