Hanging Pulleys intended for Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to aid with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as block and tackle systems. They require about 50 % the force of a single-groove pulley to move the same load.
Pulleys with a bearing are simpler to turn than pulleys without a bearing.
Acetal, nylon, and light weight aluminum are light-weight and corrosion resistant. Stainless may be the most corrosion resistant.
Designs C, D, and J have got a bracket on the bottom for tying off 1 end of a rope.
Style K reduce the force needed to hold your load in place. Unlike standard pulleys, these possess a V-groove for more grasp on your rope, plus they ratchet when under load therefore they won’t slip in the additional direction. Pulley for3/8″ dia. rope can be established to ratchet even though not under load.
Mounted Pulleys for Rope-For Horizontal Pulling
Attach these pulleys to a flat surface to aid with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to turn than pulleys with out a bearing.
Light weight aluminum and nylon are light-weight and corrosion resistant. Stainless steel gets the most corrosion resistance.
Pulleys for Rope-For Horizontal Pulling
Also known as sheaves, use these pulleys to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are easier to switch than pulleys without a bearing.
Acetal and aluminium are lightweight and corrosion resistant. Galvanized metal can be more corrosion resistant than iron and metal. Stainless steel may be the most corrosion resistant.
Easy-Open up Hanging Pulleys for Rope-For Horizontal Pulling
Also called snatch blocks, these pulleys open so it is easier to feed the rope through the housing-a free rope end is not needed. Use them to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to change than pulleys without a bearing.
Aluminum is more lightweight than stainless steel. Stainless is definitely more corrosion resistant than aluminum.
Pulleys for Wire Rope-For Horizontal Pulling
Also known as sheaves, use these pulleys to aid with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to change than pulleys without a bearing.
Acetal and nylon are light-weight and corrosion resistant. Stainless steel is the most corrosion resistant.
Mounted Pulleys for Wire Rope-For Horizontal Pulling
Install these pulleys to a flat surface to aid with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as for example block and deal with systems. They require about 50 % the force of a single-groove pulley to move the same load.
Pulleys with a bearing are simpler to change than pulleys with out a bearing.
Stainless steel is definitely more corrosion resistant than steel.
Hanging Pulleys intended for Wire Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to aid with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move an individual load, such as for example block and tackle systems. They require about half the drive of a single-groove pulley to move the same load. They possess a bracket on underneath for tying off one end of your wire rope.
Pulleys with a bearing are easier to change than pulleys with out a bearing.
Nylon is lighter in weight than metal. Aluminum is definitely corrosion resistant. Stainless steel is the most corrosion resistant.
Pulley with carabiner may mount to steel framing or hang in your rigging system.
Easy-Open Hanging Pulleys for Wire Rope-For Horizontal Pulling
Also referred to as snatch blocks, these pulleys open so it’s simpler to feed the rope through the housing-a free rope end is not needed. Use them to assist with horizontal pulling or to guide a rope.
Style D pulleys have a corrosion-resistant stainless housing.
Pulleys for Wire Rope-For Lifting
Utilize the bore to mount these pulleys on a shaft. These pulleys are also known as sheaves.
Pulleys with a bearing are easier to switch than pulleys with out a bearing.
Nylon pulleys are much lighter than steel pulleys.
Warning: Never use to lift people or items over people.
Mounted Pulleys for Wire Rope-For Lifting
Mount these pulleys to a flat surface.
Pulleys with two grooves are for make use of in applications where multiple pulleys move an individual load, such as for example block and tackle systems.They can reduce the force needed to move the load by up to two times in comparison to single-groove pulleys.
Pulleys with a bearing are simpler to turn than pulleys without a bearing.
Stainless pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never make use of to lift people or items over people.
Hanging Pulleys for Wire Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for use where multiple pulleys move an individual load, such as block and deal with systems. They require about 50 % the push of a single-groove pulley to move the same load.
Pulleys with a bearing are simpler to change than pulleys without a bearing.
Style E pulleys have bracket on the bottom that lets you tie off one end of your wire rope.
Warning: Never use to lift people or products over people.
Easy-Open up Hanging Pulleys for Wire Rope-For Lifting
Also called snatch blocks, these pulleys open therefore it’seasier to feed the rope through the housing-a totally free rope end is not needed.
Pulleys with two grooves are for make use of where multiple pulleys move a single load, such as for example block and tackle systems. They require about half the force of a single-groove pulley to move the same load.
Latch kits (sold separately) put in a latch to the swiveling hook on Style C to keep rope secure.
Warning: Never make use of to lift people or items over people
Hanging Pulleys pertaining to Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are found in applications where multiple pulleys move an individual load, such as for example block and tackle systems. They can reduce the force had a need to move the strain by up to 2 times compared to single-groove pulleys.
Pulleys with a bearing are simpler to change than pulleys with out a bearing.
Style A pulleys have a bracket on underneath for tying off a single end of a rope.
Warning: Never use to lift people or products over people.
Easy-Open Hanging Pulleys for Rope-For Lifting
Also called snatch blocks, these pulleys open so it’s easier to feed the rope through the housing-a free rope end is not needed.
Warning: Never use to lift people or items over people.