Solitary reduction worm gearing offers high ratio reduction with couple of shifting parts in a close-coupled compact drive. The proper angle set up of driving-to-driven machine takes a the least space. Input and output shafts can be extended in either or both directions in horizontal or vertical plans adaptable to any installation requirement. Efficient motor speeds are decreased to slow speed requirements of many industrial machines in one reduction.
Product Features
Ratios 5:1 to 70:1
Hollow & Solid Output Shafts
Vertical & Horizontal Mounting
Fan Cooled (Standard)
Motor Mounts (C-Face Adapters or Scoops)
Cast Iron or Metal Housings
Products
The exclusive utilization of the involute Helicoid Thread form (with departing side contact) on the worm and gear provides for high efficiencies, and lengthy service lifestyle. The hardened ground and polished alloy metal worm develops a smooth, work hardened surface on the bronze gear. For this reason worm gears put on in and improve with extented service while other gears are wearing out. Ever-Power offers a wide selection of model configurations, sizes, ratios, and add-ons from our standard products.
Fabricated Designs
If your application involves serious shock loads or feasible housing damage from external sources (as in steel mills or mobile products applications) Ever-Power can provide fabricated steel housings with up to a 48″ center distances. Fabricated housings provide optimum rigidity and strength that allows the transmitting of higher horsepower amounts than are feasible with regular cast iron devices. Extra heavy part plates connect the worm and gear shaft bearing supports, assuring appropriate meshing of the apparatus under all load circumstances. In smaller sized sizes, fabricated metal reducers are interchangeable with Ever-Power standard cast iron reducers.
Custom Designs
Ever-Power can provide custom velocity and reversed engineered reducers for your application, be it a fresh project or a primary drop-in replacement for a competitor’s acceleration reducer. Fabricated metal reducers allow Ever-Power to match a competitor’s footprint, centerline, and shaft elevation allowing a primary drop-in alternative saving the customer time and money.
Long – Quiet Life
All worm gears in Ever-Power reducers are produced from phosphorous bronze. Our design also incorporates a hardened, surface and polished alloy steel worm. This mixture develops a soft, work-hardened mating surface area of the bronze gear which boosts with prolonged service.
Worm gearing is a course of equipment reducers that utilizes right angle, nonintersecting shafts. This style of reducer provides clean and quiet procedure and allows for the possibility of large speed reductions. These gears are available from share in a wide selection of ratios, from as low as 4:1 to as much as 3600:1. The compact design and structure allows worm equipment reducers to be placed in a relatively small space. Thus, high reductions in a limited package size can be achieved with this configuration. Our worm equipment features the continuous sliding tooth actions between worm and the teeth. This increases the tolerance for heavy loads and shock loads. Worm gear worm gear speed reducer drives offer users high reducing convenience of relatively low cost in comparison with various other types of gearing.
The utilization of worm gearing extends across many industries including food, beverage and grain and has many applications. Some applications that make use of worm gearing are: conveyors, mixers and bucket elevators.
Ever-Power worm equipment reducer gearbox series base on years of experiences uses designed teeth surface with unsurpassed torque transfer performance with great overall performance, efficency and price.Worm gear program transmits power through sliding contact, leading to extremely low vibration , noise, little backlash and self-locking property
-Housing:Onetime we casting creats great rigidity for severe impacts. Outer cooling fins and internal lubrication oil diversion channel style to increase heat dissipation.
-Worm Shaft: Manufactured with Carbon alloyed Metal S45C or SCM415, precison machined and carburized to HRC45 or HRC60, after that for precision tooth grinding to ensure maximum contacting.
-Worm Wheel: Manufactured with Carbon alloy ALBC2, teeth are machined by precision CNC hobbing machine to sustain high impact.
A worm gear reducer is one kind of reduction gear box which includes a worm pinion input, an output worm equipment, and includes a right angle output orientation. This kind of reduction gear box is generally used to take a rated motor speed and create a low speed output with higher torque value based on the decrease ratio. They often can resolve space-saving problems since the worm gear reducer is one of the sleekest reduction gearboxes available because of the small diameter of its result gear.
worm gear reducerWorm equipment reducers are also a favorite type of velocity reducer because they offer the greatest speed decrease in the tiniest package. With a higher ratio of speed reduction and high torque output multiplier, it’s unsurprising that many power transmission systems make use of a worm gear reducer. Some of the most typical applications for worm gears can be found in tuning instruments, medical screening equipment, elevators, protection gates, and conveyor belts.
SW-1 and SW-5
Torque Transmission offers two sizes of worm gear reducer, the SW-1 and the SW-5 and both are available in a range of ratios. The SW-1 ratios include 3.5:1 to 60:1 and the SW-5 ratios include 5:1 to 100:1. Both of these options are manufactured with durable compression-molded glass-fill polyester housings for a long lasting, long lasting, light-weight speed reducer that is also compact, non-corrosive, and nonmetallic.
Features
Our worm gear reducers offer an option of a solid or hollow output shaft and show an adjustable mounting position. Both the SW-1 and the SW-5, nevertheless, can endure shock loading much better than other decrease gearbox styles, making them perfect for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Equipment Reducers also known as worm gearbox or worm rate reducers. Worm gear reducers are used for speed reduction and increasing the torque for electrical electric motor drives. You can decide to install your NEMA electric motor to the reducer utilizing the NEMA C encounter flange or use a coupling. If you need a coupling for the result or input shaft find our coupling section for choosing the coupling. We offer four assemblies left hand and right hands and double result shaft and shaft insight and shaft result. Interchangeable with most worm gear manufactures. See data sheet in item overview for diamensions. Unless you see your type, please Contact Us.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Models for 56C and 145TC Motors
Ever-Power DDVM series triple-reduction worm gear velocity reducers can be found in ratios from 5000:1 to 175,000:1 and center distances from 7” to 20” (larger sizes available on request). Output torque ranges from 33,000 in lbs. for the 7” CD DDVM-70 to 582,900 in pounds for the DDVM-200. Mechanical HP input requirements are from 0.09 HP for the 175,000:1 7 in CD reducer to 6.25 HP for the 5000:1 20” CD unit. These reducers can be found in four configurations: horizontal, vertical, shafted, and shaft mounted.
These reducers are ideal for water/waste-water devices drive applications such as for example thickeners and clarifiers, which require a vertical straight down shaft. Other obtainable configurations also make Ever-Power triple reduction reducers perfect for make use of on mixers, elevators, solar power panels, astronomical telescopes, indexing tables, hoists, conveyors, or additional process or components handling systems where large torques/slow speeds are needed.
These reducers are also obtainable with a helical principal reduction stage and are termed the HDVM series
Product Features
Ratios 5000:1 to 175,000:1
HP from 0.09 to 6.25.
Output Torque to 583,000 in lbs.
Output RPM only 0.01 with a 1750 RPM input.
Ideal for ultra-slow speed, high torque applications
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Versions for 56C and 145TC Motors
Description
The HDR Series worm equipment reducers are used in low to moderate horsepower applications to lessen speeds and increase torque. Worm gear reducers can be found in direct or indirect drive, direct drive models are 56C or 145TC flange attach with either right, left or dual output shafts or a hollow bore output. The indirect drive models are shaft input-shaft output boxes for make use of with sprocket or pulley drive systems. They provide an effective low cost solution to speed reduction and increased torque, with higher tolerances for shock loading than helical gear reducers.
In order to decide on a gearbox speed reducer, you will need to determine the mandatory torque and provider factor for the application. Click on “Specs” above for a table that will aid in identifying the service aspect. For service elements above 1.0, multiply the mandatory torque by the assistance factor.
Our standard 700 Series – the heart of Ever-Power acceleration reducer product line – has been serving industry reliably for over 40 years. Its confirmed modular design has set the sector standard for functionality and may be the most imitated item in today’s worm gear rate reducer market. But why settle for a knock-off when you’re able to have the initial – from Ever-Power.
Specifications
11 basic single reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating lifestyle.
Its multi-position mounting versatility allows for installation in practically any position.
Housings are straddle-milled, top and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for optimum durability, along with greater precision during worm and gear alignment.
Ever-Power 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill up, level, and drain in any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal life.
Both 2D and 3D CAD drawings are available in our eCatalog.
TheIncreased Quality! Industrial Ranked! Inexpensive!One-piece gearcase, without external ribs, is made of close-grained cast iron and provides for rigid gear and bearing support. In addition, it offers excellent high temperature dissipation.Double lip, spring-loaded seals guard against oil leakage and prevent dirt from entering.Stepped shafts with oversized ball andtapered roller bearings.Carbon metal shafts for greater power.High tensile strength cast bronze worm wheel and hardened and ground alloy steel worm made intregal with the shaft for long and trouble-free life.Essential oil sight gauge for ease of maintenance (not available upon sizes 25 and 34).Factory oil packed.Every device test run prior to shipment.Universal mounting with bolt-on feet.Highly modifiable design.All this at substantially decrease prices than you have already been accustomed to spending money on reducers of lesser quality. Less